★★★★★ 5.0 · 12 Google reviews

Get more from every hour of Melbourne sun

Dirty panels can lose 15–25% of their output. We clean them using a professional deionised water system — no streaks, no residue, no scratches. Fully insured, satisfaction guaranteed.

Solar panels before cleaning Melbourne
Before
Solar panels after cleaning Melbourne
After
★★★★★ 5.0 Google rating
$10M Fully insured
100% Satisfaction promise

What dirty panels are costing you

Dust, pollen, bird droppings and grime build up quietly — and cost you money every day they're left on the glass.

Restore lost output

A layer of grime can reduce solar output by 15–25%. A professional clean restores that lost generation and helps your system perform as designed — particularly important during Melbourne's high-sun months.

Deionised water — no residue

We use a professional DI water system. Unlike tap water, deionised water contains no minerals, so it leaves zero residue or streaking on the glass when it dries. The result is genuinely spotless panels.

Safe for your panels and warranty

We use soft brushes and low pressure — never abrasive tools or harsh chemicals. This protects the anti-reflective coating and the panel surface, keeping your manufacturer warranty intact.

Roof access done properly

Getting on a roof safely requires the right equipment and training. We handle it professionally so you don't have to — fully insured to $10M, with no risk to you or your property.

Before & after — Melbourne solar panels

These are real panels cleaned by Brophy's. The difference in surface clarity is immediate — and so is the difference in output.

Solar panels dirty before cleaning Melbourne
Solar panels clean after professional cleaning Melbourne

Bird droppings, dust and organic buildup like this are common across Melbourne — especially in leafy suburbs and areas near parks. Our DI water system removes all of it without leaving a trace.

How we clean solar panels

Solar panels require a specific approach. The wrong method — too much pressure, abrasive brushes, or tap water with high mineral content — can cause permanent damage. Here's what we do instead.

1
Inspect panels and access route

We assess the roof pitch, panel layout and soiling type before starting — bird droppings, dust, lichen and general grime all require slightly different handling.

2
Pre-rinse with DI water

We use our deionised water system to rinse loose debris from the panels at low pressure before any brushing. This avoids grinding particles across the glass surface.

3
Soft brush clean

Using soft, panel-safe brushes fed by our DI water system, we work across the full surface of each panel — removing stubborn deposits without scratching or marking the glass.

4
Final rinse and check

A final DI water rinse removes any remaining residue. Because DI water contains no minerals, it dries spotlessly clean — no streaks, no water marks, no film.

Why deionised water makes the difference

Tap water contains dissolved minerals — calcium, magnesium, and others — that leave a visible film on glass as the water evaporates. This is the white residue you see on windows after rain. On solar panels, that residue blocks light and reduces output. Deionised water has had those minerals removed, so when it evaporates, it leaves absolutely nothing behind. It's the professional standard for any surface where optical clarity matters.

Cleaning method DI Water System

Panel types & soiling conditions

We clean all common residential and commercial solar panel systems across Melbourne, handling a full range of soiling types.

Monocrystalline panels The most common type. High-efficiency black panels found on most Melbourne homes.
Polycrystalline panels Blue-tinted panels typically installed on older systems. Same gentle clean, same result.
Thin-film panels More delicate surface requiring careful low-pressure handling — we know the difference.
Bird droppings The most damaging soiling type — highly acidic and focused in one spot. We remove them safely without scratching.
Dust & pollen Fine particles settle across the full panel surface, forming a light-blocking film. Common in Melbourne's drier months.
Lichen & organic growth Less common but more stubborn — particularly on panels in shaded or leafy areas. Requires targeted pre-treatment.

Real reviews from Melbourne homeowners

Every review is a real customer — no scripts, no incentives.

Stu M. Melbourne
★★★★★

"From the moment he arrived, he was professional, efficient, and clearly knew his stuff. He even pointed out a couple of small issues we wouldn't have noticed ourselves and took care of them on the spot. Reliable, friendly, and genuinely takes pride in his work."

Kate Melbourne
★★★★★

"Outstanding result from this pressure washing service! The difference it made was mind blowing! Highly recommended!"

See all 12 Google reviews →

Solar panel cleaning across Melbourne

We service solar panels right across Melbourne. Here are some of the suburbs we regularly work in — if yours isn't listed, just ask.

Kew Hawthorn Toorak Camberwell Malvern St Kilda Richmond Fitzroy Brunswick Doncaster Northcote Ivanhoe Elwood Balwyn Glen Iris South Yarra Heidelberg Collingwood

Don't see your suburb? Just ask — we likely cover your area too.

Solar panel cleaning — frequently asked questions

How often should I clean my solar panels in Melbourne?
Most Melbourne homeowners benefit from once or twice a year. Panels near trees, busy roads, or with heavy bird activity may need more frequent cleaning. We can advise after a quick look at your setup.
Will cleaning actually improve my panel output?
Yes. Studies consistently show soiled panels lose 15–25% of their energy output. A professional clean removes the grime blocking sunlight from reaching the cells and restores that lost generation.
Why not just let rain clean the panels?
Rain can rinse loose dust, but it doesn't remove bird droppings, lichen or the mineral film left by tap water and Melbourne's hard water — and it won't clean the lower edge of the panel where grime accumulates most. A professional clean gets all of it.
Is it safe to clean solar panels yourself?
Not recommended. Most panels are on roofs, creating a serious fall risk. The wrong brush or pressure can also permanently scratch the glass or damage the anti-reflective coating. Professional cleaning is safer and produces better results.
How much does solar panel cleaning cost in Melbourne?
Solar panel cleaning starts from $300. The final price depends on the number of panels, roof pitch and access. We provide free, no-obligation quotes — call 0477 011 418 or fill in the form below.
Will cleaning void my solar panel warranty?
No — as long as the cleaning method is safe. We use soft brushes, low pressure and DI water, which is the method recommended by most panel manufacturers. We never use abrasive tools or harsh chemicals.
Have more questions? Visit our full FAQ page →

Get a free solar panel cleaning quote

Fill in the form and we'll be in touch within 24 hours with a fair, no-obligation price. Or call us directly on 0477 011 418.

We respond within 24 hours
Free, no-obligation quote
DI water system — no streaks or residue
Fully insured to $10M
Satisfaction promise on every job

We respond within 24 hours · No obligation